Sharp AL-1000

(11) Remove the parts as shown below, and remove the pres-
sure release solenoid and the paper feed solenoid.
(12) Remove six screws and remove the LSU unit.
(13) Remove two screws and remove the fusing connector.
(14) Remove five screws and the connector, and lift the inter-
mediate frame unit to remove.
(15) Remove the screw and the E-ring, and remove the PS
semi-circular earth plate and the PS roller unit.
(16) Remove the E-ring and remove the spring clutch from the
PS roller unit.
3)
3)
1)
1)
2)
2)
4)
4)
1)
1)
2)
2)
2)
3)
4)
1)
5)
4)
4)
1)
2)
3)
PS roller unit
PS semi-circuler
earth plate
5)
4)
4)
1)
2)
3)
PS roller unit
PS semi-circuler
earth plate
AL-1000/1010
8-10