Sharp AL-1000

(17) Remove three screws and remove the TC front paper
guide.
(18) Remove the screw and the connector, and remove the
PPD1 sensor PWB.
(19) Remove two E-rings and remove the paper feed roller.
(20) Remove three E-rings and remove the clutch unit.
C. Assembly procedure
For assembly, reverse the disassembly procedure.
4)
5)
1)
2)
3)
4)
Back
Front
Clutch unit
Paper feed
roller
1)
2)
1)
2)
AL-1000/1010
8-11