AL-2020/2035/2040/2050/2060 SPECIFICATIONS 2 - 7
Send functions Application send
function
Manual send
function
This function allows to switch to FAX manually when off-
hook with document set.
Time specifying
send function
Available
communication
Memory send, Polling, serial broadcast, serial send
request
Number of set items Max. 5 items
Set range 00:00 - 23:59 (Unit: 1 min)
Day of week 8 kinds (From Monday to Sunday, and no specification)
Group send
function
A message is sent sequentially to two or more
destinations registered in group dial. (Max. 52
destinations can be registered in one group.)
Serial broadcast
function
Broadcast send
destination
Max. 100 items
Duplex send
function
Valid only in duplex support models.
Direct send and scan from OC cannot be made.
Send document size A4/ Letter/ Legal size
Incoming
functions
system
Incoming
detection
function
Call signal
detection function
Call bell is distinguished from net call signals to judge
incoming.
Remote select
function by CNG
detection
Receive is started when CNG signal is detected in
standby with external telephone used.
Application
incoming
function
Distinctive Ringing
function
Only distinction of TEL/FAX (When FAX distinction of
ON/OFF)
Default: OFF
Incoming reject
function
Incoming is rejected when remaining memory capacity is
less than 7%.
Call sound volume
adjustment
function
Volume select OFF/LOW/MIDDLE/HIGH
Alarm sound
volume adjustment
function
Volume select OFF/LOW/MIDDLE/HIGH
Key sound volume
setting
Follows setting on the main unit.
Junk FAX
protection function
Junk stations are registered to be rejected.
Number of
registrations
Max. 10 items
Receive
functions
system
Receive
function
Receive standby
mode
• Auto (AUTO)
• Manual (MAN.)
• Answering machine (A.M.)
Basic receive
function
Auto receive
function
The line is switched to FAX by detection of call signal.
(receive standby mode)
Number of calls AUTO: 0 - 9 times (Default: 2 times)
Tel/FAX auto select No
Incoming reject
conditions
• During Simulation by serviceman
• Insufficient memory capacity
• During menu
• During memory status display
Manual receive
function
Receive is manually started.
Number of calls 0 - 9 times (Default: 0 times)
Memory receive
function
Receive data are accumulated in memory, and outputted
when output conditions are satisfied.
Substitution receive
function
Countermeasure against print inhibit state.
• No recording paper
• Recording paper jam
• During copy/print job
• During printing by printer
• Cover open
• Paper empty, size error
Forcible memory
receive function
No
Overtake output
function
No
Large item Middle item Small item Sub item Specifications
To Next Page
Loading...
Need help?
General
