Sharp Aquos LC-32D33X

28
Password setting for the child lock
(for TV input mode)
Allows you to use a password to protect certain
settings from being accidentally changed.
Setting a password
Register a 4-digit password number to use the Child
Lock function.
Press MENU and the MENU screen displays.
1
Press
c
/
d
to select “Setup”.
2
Press
a
/
b
to select “Child Lock”, and then
press ENTER.
3
If you already set the password, enter it here.
4
Watching TV
Change password
Clear password
Parental rating
New Password
Reconfirm
Enter your new password.
Use 4 digits.
NOTE
• To view a locked channel (Lock setting in Programme
Setup “Manual Adjust” is set to “On”), you must enter
a password. (See page 24.) When you select a locked
channel, a password prompt message pops up. Press
RETURN to display the password input window.
Enter the same 4-digit number as in step 6 to
confi rm.
7
Press a/b to select “Change password”, and
then press ENTER.
5
Change password
Clear password
Parental rating
New Password
Reconfirm
Enter your new password.
Use 4 digits.
Enter the 4-digit number as a password using
0 — 9.
6
Clearing the password
Allows you to clear your password.
NOTE
• As a precautionary measure, make a note of your
password and keep it in a familiar place. If you lose
or forget your password, initialise the TV to return all
settings except for the TV channel settings to factory
preset values. (See page 74.)
• This function is only available for TV input mode.
• To relock a channel which has been temporarily unlocked
by inputting the correct password, turn power off and then
on again.
Yes No
Change password Clear password.
Clear password
Parental rating
Press
c
/
d
to select “Yes”, and then press
ENTER.
Press
a
/
b
to select “Clear password”, and
then press ENTER.
Repeat steps 1 to 3 in Setting a password.
Enter the password.
1
2
3
4
32D33X_en_d.indd 2832D33X_en_d.indd 28 2008-1-24 15:57:232008-1-24 15:57:23