Sharp Aquos LC-32D33X

1
2
3
4
5
36
Watching TV
Press MENU and the MENU screen displays.
Press
c
/
d
to select “Picture”.
Press
a
/
b
to select “Advanced”, and then
press ENTER.
H Colour Temp. (Colour temperature)
Adjusts the colour temperature to give the best white
image.
Advanced picture settings
The advanced settings enable you to set the picture
adjustment in more detail. There are 6 options you can
choose from.
Press
a
/
b
or
c
/
d
to select the desired level,
and then press ENTER.
Press
a
/
b
to select the desired menu, and
then press ENTER.
Selected item Description
High
Mid-High
Middle
Mid-Low
Low
White with bluish tone
White with reddish tone
Colour Temp.
Film Mode
Active Contrast
3D-Y/C
Monochrome
Range of OPC
High
Mid-High
Middle
Mid-Low
Low
H 3D-Y/C
Provides high quality images with minimal dot crawl
and cross colour noise.
Selected item Description
Standard Normal adjustment
Fast Set the optimum image quality for fast-
moving images.
Slow Set the optimum image quality for slow-
moving images.
Off No detecting
NOTE
• 3D-Y/C is not selectable depending on the input signal
type.
• 3D-Y/C may not operate depending on the input signal
type or noisy input signal.
H Monochrome
For viewing images in monochrome.
H Range of OPC
The brightness level range of the OPC sensor’s
automatic adjustments can be set according to your
preferences. The adjustment range of the OPC sensor
can be set to a maximum of +16 and a minimum of
-16.
Selected item Description
Max. -15 through +16
Min. -16 through +15
NOTE
• This function is available only when the OPC setting is set
to On or On: Display.
• The maximum setting cannot be set to a smaller number
than the minimum setting.
• The minimum setting cannot be set to a bigger number
than the maximum setting.
• The maximum and minimum settings cannot be set to the
same number.
• Depending on the brightness of the surrounding light, the
OPC sensor might not operate if the adjustment range is
small.
H Film Mode
Automatically detects a fi lm-based source (originally
encoded at 24/25 frames/second, depending on the
vertical frequency), analyses it then recreates each still
fi lm frame for high-defi nition picture quality.
NOTE
• Film Mode is not selectable depending on the input signal
type.
H Active Contrast
Automatically adjusts the contrast of an image
according to the scene.
32D33X_en_e.indd 3632D33X_en_e.indd 36 2008-1-24 15:57:422008-1-24 15:57:42