51
Settings when using external devices
Press MENU and the MENU screen displays.
1
Press
c
/
d
to select “Option”.
2
Press
a
/
b
to select “Colour System”, and
then press ENTER.
3
Press
a
/
b
to select a compatible video signal
system of your equipment, and then press
ENTER.
4
Colour system settings
Auto
PAL
SECAM
NOTE
• Factory preset value is “AUTO”.
• If “AUTO” is selected, colour system for each channel is
automatically set. If an image does not display clearly,
select another colour system (e.g. PAL).
• “Colour System” is selectable only when inputting an
S-VIDEO or composite signal.
Colour system settings
You can change the colour system to one that is
compatible with the image on the screen.
NOTE
• You cannot change labels if the input source is TV.
Press TV/VIDEO to select the desired input
source.
1
Press MENU and the MENU screen displays.
2
Press
c
/
d
to select “Setup”.
3
Press
a
/
b
to select “Input Label”, and then
press ENTER.
4
Labelling input sources
You can assign each input source a label as you
prefer.
TV
INPUT1
INPUT2
DVD
INPUT4
Repeat the above until the name is fully spelt
out.
• The name can be 6 characters or less.
• When you want to set an input source name of
less than 6 characters select “END”, then press
ENTER to exit from the labelling menu.
(Example)
6
Press
a
/
b
/
c
/
d
to select each character of
the new name for the input source, and press
ENTER.
5
Yes
No
INPUT 3 (HDMI)
INPUT 4 (HDMI)
INPUT 5 (RGB)
Skip input selection of HDMI
Press MENU and the MENU screen displays.
1
Press
c
/
d
to select “Setup”.
2
Press
a
/
b
to select “Input Skip”, and then
press ENTER.
3
Press
a
/
b
to select the Input (INPUT 3 to
INPUT 5) you wish to skip, and then press
ENTER.
4
Press
c
/
d
to select “Yes”, and then press
ENTER.
5
Press MENU to exit.
6
Skipping HDMI/RGB input
This setting allows you to skip the HDMI or RGB input
on the Input Selection Operation.
A
BACK
CLEAR
END
K
U
B
L
V
C
M
W
D
DVD
N
X
E
O
Y
F
P
Z
G
Q
+
H
R
– _
I
S
.
J
T
0 1 2 3 4 5 6 7 8 9
(Example)
32D33X_en_g.indd 5132D33X_en_g.indd 51 2008-1-24 15:58:262008-1-24 15:58:26
To Next Page
Loading...
