Sharp Aquos LC-32D33X

48
To watch an HDMI equipment image, select
“INPUT3” or “INPUT4” using TV/VIDEO on the
remote control unit or TV/VIDEO on the TV.
1
Press MENU and the MENU screen displays.
2
Press
c
/
d
to select “Setup”.
3
Press
a
/
b
to select “HDMI Setup”, and then
press ENTER.
• The HDMI Setup can be selected only when
“INPUT3” or “INPUT4” is selected.
4
MENU
[
Setup
...
HDMI Auto View
]
Setup Option
Input Skip
Input Signal
Input Label
Position
HDMI Auto View
Reset
[Mode2]
Standby Mode
[English]
Language
[Enable]
1360m768
H
HDMI (High-Defi nition Multimedia Interface)
terminal selection
Press
c
/
d
to select the desired item, and
then press ENTER.
5
Co
nnecting an HDMI output device
Settings when using external devices
HDMI output
device
Settings when using HDMI output devices
HDMI terminals can carry audio and visual signals to the TV with an HDMI certifi ed cable. When you want to output
the audio and picture from an HDMI output device on the TV, select “INPUT3” or “INPUT4” by switching the input
source.
HDMI cable (commercially available)
Selectable
items
Description
Enable/
Disable
Set whether or not to use WIDE MODE
based on signal recognition, including an
HDMI signal.
32D33X_en_g.indd 4832D33X_en_g.indd 48 2008-1-24 15:58:252008-1-24 15:58:25