57
Connecting a PC
Use the PC terminals to connect a PC.
Signal names for 15-pin mini D-sub connector
NOTE
• Macintosh adaptor may be required for use for some Macintosh computers.
• Pin No.
5
is not used for inputting the signal.
15
14
13
12
9
11
10
8
7
6
5
4 3
2
1
Pin No. Signal name Pin No. Signal name Pin No. Signal name
R GND (Ground) Not connected
G GND (Ground) SDA
B GND (Ground) HD
Not connected +5V VD
CSYNC GND (Ground) SCL
HDMI Connection
Analogue Connection
PC
HDMI cable
(Commercially available)
DVI/HDMI conversion cable
(Commercially available)
Ø 3.5 mm stereo minijack cable
(Commercially available)
INPUT 3
Ø 3.5 mm stereo minijack cable (Commercially available)
RGB/DVI conversion cable (Commercially available)
RGB cable (Commercially available)
NOTE
• The PC INPUT terminals are DDC1/2B-compatible.
• Refer to page 62 for a list of PC signals compatible with the TV.
INPUT 4
PC
PC
PC
INPUT 5
INPUT 5
Ø 3.5 mm stereo minijack cable (Commercially available)
32D33X_en_h.indd 5732D33X_en_h.indd 57 2008-1-24 16:59:592008-1-24 16:59:59