65
Teletext function
1
2
Select a TV channel providing Teletext
information.
(The time information is automatically
captured.)
Press DISPLAY. The channel display will
appear on the display.
3
4
Press DISPLAY again. The channel display
about three seconds on the screen. Time
information will continuosly display on the
lower right of the screen.
Even when you change the TV channel, you
can display the time information with steps 2
to 3 above.
NOTE
•
The time display cannot be stored once the power is turned
off. When you turn on the power, perform steps 1 to 4 again.
• If acquired successfully the time information will appear in
the upper-right corner of the screen by pressing MENU.
Time display
You can display the time information included in the
Teletext broadcast.
32D33X_en_i.indd 6532D33X_en_i.indd 65 2008-3-6 11:45:022008-3-6 11:45:02
To Next Page
Loading...
