Sharp Aquos LC-32D33X

53
AQUOS LINK connection
First connect the 1 BIT THEATER RACK SYSTEM (AQUOS AUDIO) or an AQUOS BD Player/AQUOS Recorder
that supports the HDMI CEC protocol.
NOTE
• Refer to the operation manual of the device to be connected for further details.
• After unplugging connection cables or changing the connection pattern, fi rst turn on the power of the TV with all relevant
device’s power turned on. Change the external input source by pressing TV/VIDEO, select the appropriate input source and
verify the audiovisual output.
• The cables illustrated in the following explanation are commercially available items.
AQUOS LINK
On Off
Auto Power On
Selecting Recorder
Using Genre Info.
AQUOS LINK Setup
Press MENU and the MENU screen displays.
1
Press
c
/
d
to select “Option”.
2
Press
a
/
b
to select “AQUOS LINK Setup”,
and then press ENTER.
3
AQUOS LINK Auto power on
If this is activated, the One Touch Play function
is enabled. While the TV is in standby mode, it
automatically turns on and plays back the image from
the HDMI source.
Press
a
/
b
to select “Auto Power On”, and
then press ENTER.
4
Press
c
/
d
to select “On”, and then press
ENTER.
5
Press MENU to exit.
6
NOTE
• The factory default for this item is “Off”.
Connecting an AQUOS BD
Player/AQUOS Recorder only
AQUOS BD Player/
AQUOS Recorder
1 BIT THEATER
RACK SYSTEM
AQUOS BD Player/
AQUOS Recorder
Connecting an AQUOS BD Player/AQUOS
Recorder via the AQUOS AUDIO
HDMI-certifi ed cable
HDMI-certifi ed
cable
HDMI-
certifi ed
cable
Optical AUDIO cable
32D33X_en_g.indd 5332D33X_en_g.indd 53 2008-2-25 16:09:212008-2-25 16:09:21