Introduction to Connections
An HDTV without an HD source is just an ordinary TV,
To enjoy HD images on the TV, you should get HD programming from the following:
. Over--the--air broadcasling via HD quaN-y antenna
HD cable/satellite subscription
HD compatible external equipment
* For information on updating to HD programming, ask your cable/satellite service provider.
Image quaN-y differs depending on the terminal used. To enjoy clearer images, check the output terminals of your
external equipment and use its appropriafe terminals for higher quality images.
For connecting the TV to external equipment, use commercially available cables.
* The illustrations of the terminals are for explanation purposes and may vary slightly from the actual products.
HD
Quality
d
Standard
Quality
INPUT 12 34
_ HDMl-certified cable _ _ _, Page t3
M_rnl H_ml
O 3.5 mm stereo mini jack cable
AUDFO
INPUT 12 34
DVI OUT DVI-HDMI conversion cable _ _ _ Page t3
_ __coM_o., _ Component video cable _ _'_
0diocab,e *Page.
,.PUTB_
AVcable _ !i
_® ®_ ® ._Paget4
AUDIO VIDEO
To view external source images, select the input source by pressing INPUT on the remote control unit or on the TV.
Example 1 Press INPUT,
©_©
The INPUT list screen displays.
2 Press A/T to select the input source.
You can also select the input source by pressing
INPUT. Each time INPUT is pressed, the input source
toggles.
HDMI1 ._. HDMI2 ._. HDMI3 ._ HDMI4 ._. C©MP/AV
TV _ DLNA_USB PC IN
An image from the selected source automatically
displays.
O- 12
To Next Page
Loading...
