Connecting to External Equipment
You can connect many types of external equipment to your TV, To view external source images, select the input
source from INPUT on the remote control unit or on the TV. (See pages 12 and 20.)
For connecting the TV to external equipment, use commercially available cables.
,, To protect equipment, always turn off the TV before connecting any external equipment.
• Please read the relevant operation manual (Blu-ray disc player, etc.) carefully before making connections.
[] When using HDMI cable (INPUT 1, 2, 3 or 4}:
The HDMI (High Definition Multimedia interface) terminal is an audiowideo interface that enables a connection for audio and video
signals using a single cable. The HDMI terminal supports high-resolution video input.
• Blu-ray disc player • DVD player
• HD cable/satellite set-top box _
HDMI-certified cane
• To enjoy 1080p display capability, connect your external equipment using an HDMbcertified cable or a component cable and
set the equipment to 1080p output.
• Supported Audio format: Linear PCM, sampling rate 32/44.1/48kHz.
• When you connect ARC-compatible equipment, use INPUT 4.
[] When using DVI-HDMI conversion cable (INPUT 1, 2, 3 or 4):
" Blu-ray disc player = DVD player
• HD cable/satellite set-top box
• When using a DVbHDMI conversion cable, you should make an analog audio connection. In this case, in addition to
connecting a DVPHDMI conversion cable to the iNPUT 1, 2, 3 or 4 terminal, connect a D 3.5 mm stereo mini jack cable to
the AUDIO PC/HDMI terminal and set "Audio Select" to "HDMl+Analog". (See page 46.)
(D- 13
To Next Page
Loading...
