EasyManuals Logo

Sharp EE Series User Manual

Sharp EE Series
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
Viewing Angle Viewing Angle
A B
8
SECURING THE TV TO A WALL
For maximum safety in the home, when using a TV with its stand, anti-tip straps should be tted. These are
available from major retailers & websites and are an easy, inexpensive and e ective way of ensuring your TV
stays safely upright. Straps are designed to be attached to the rear of the TV and then tethered to the wall or
furniture the TV is stood on, these are tted as follows.
Using one or both of the top wall-mounting
holes and screws fasten one end of the fastening
cord/s to the TV. (the screws are already supplied in
the wall mounting holes)
Secure the other end of the fastening cord/s to
your wall. (you will need screws/ xings suitable for
your wall type - available separately from most DIY
stores).
Note: Please ensure that children do not climb on the TV set.
Note: When handling the set do not grip the LCD Panel.
Note: Do not pull the set when mounted on a bracket. If using a moveable bracket, adjust via the
bracket and not the set.
The Royal Society for the Prevention of Accidents is urging people to take care with at-screen televisions.
RoSPA stated in 2010 that “Toddlers are particularly at risk of pulling at-screen televisions on to themselves.
They are unsteady on their feet and are attracted by colourful television images.”
The risk is increased as televisions become lighter.
IMPORTANT - Before drilling any holes in the wall ensure you are not drilling where there could be any electrical
wires, water or gas pipes.
1. Remove the four screws located at the back of the TV set.
2. The wall mount can now be easily attached to the mounting holes,
located on the back of the TV, using the same four screws removed.
Important: If wall mounting this TV, only use the screws already provided in the wall mounting holes.
Using other screws which are longer could cause irreparable damage to the internal parts. When using a
wall bracket, please ensure the screws in the back of the TV set are not over tightened.
Note: This diagram to the left is an example of screw positions. Due to
model variations, please ensure you check your TV for the exact location of
the wall mounting screw positions.
Securing the TV to a wall with anti-tip straps
Wall mounting & Viewing Angle
Securing to a wall
A
B

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp EE Series and is the answer not in the manual?

Sharp EE Series Specifications

General IconGeneral
BrandSharp
ModelEE Series
CategoryLCD TV
LanguageEnglish

Related product manuals