– E-8 –
[Determination of the Angular Unit]
The following three angular units (degrees, radians, and grades)
can be specified.
• DEG (°) : Press ”00.
• RAD (rad): Press ”01.
• GRAD (g) : Press ”02.
[Selecting the Display Notation and Decimal Places]
Four display notation systems are used to display calculation
results: Floating point; Fixed decimal point; Scientific notation;
and Engineering notation.
• When the FIX, SCI, or ENG symbol is displayed, the number of
decimal places (TAB) can be set to any value between 0 and 9.
Displayed values will be reduced to the corresponding number of
digits.
[Setting the Floating Point Numbers System in Scientific Notation]
Two settings are used to display a floating point number: NORM1
(default setting) and NORM2. A number is automatically dis-
played in scientific notation outside a preset range:
• NORM1: 0.000000001 ≤
|
x
|
≤ 9999999999
• NORM2: 0.01 ≤
|
x
|
≤ 9999999999
100000÷3=
[NORM1] ª 100000 / 3 =
33’333.33333
→[FIX] ”10
33’333.33333
[TAB 2] ”22
33’333.33
→[SCI] ”11
3.33
×
10
04–
→[ENG] ”12
33.33
×
10
03–
→[NORM1] ”13
33’333.33333
3÷1000=
[NORM1] ª 3 / 1000 =
0.003
→[NORM2] ”14
3.
×
10
–03
→[NORM1] ”13
0.003
EL5060E_En0616.pm65 06/16/2004, 13:108
To Next Page
Loading...
