– E-13 –
Memory Calculations
Mode ANS M, F1-F4 A-F, X,Y
NORMAL
STAT ××
EQN ×××
CPLX ×
MAT ×
LIST ×
: Available × : Unavailable
[Temporary memories (A-F, X and Y)]
Press O and a variable key to store a value in memory.
Press R and a variable key to recall a value from the
memory.
To place a variable in an equation, press
K
and a variable key.
[Independent memory (M)]
In addition to all the features of temporary memories, a value
can be added to or subtracted from an existing memory value.
Press ªOM to clear the independent memory (M).
[Last answer memory (ANS)]
The calculation result obtained by pressing = or any other
calculation ending instruction is automatically stored in the last
answer memory. A Matrix/List format result is not stored.
[Formula memories (F1-F4)]
Formulas up to 256 characters in total can be stored in F1 - F4.
(Functions such as sin, etc., will be counted as one letter.)
Storing a new equation in each memory will automatically replace
the existing equation.
Note:
•
Calculation results from the functions indicated below are auto-
matically stored in memories X or Y replacing existing values.
• Random function .......... Y memory
• →rθ, →xy ........................
X memory (r or x), Y memory (θ or y)
• Use of R or K will recall the value stored in memory
using up to 14 digits.
ª 8 * 2 OM
16.
24÷(8×2)= 24 /KM=
1.5
(8×2)×5= KM* 5 =
80.
ªOM
0.
$150×3:M1 150 * 3 ;
450.
+)$250:M2 =M1+250 250 ;
250.
–)M2×5% RM* 5 @%
35.
M @:RM
665.
EL5060E_En0616.pm65 06/16/2004, 13:1013
To Next Page
Loading...
