R D
R f e p
If the other party first talks to and then wants to send a document, press “5”
“x” and “x” if you are on a tone dial phone. If you are on a pulse dial phone. set
the handsetdown (do not hang up), walk over to the fax, pick up the handset, and
press the START key.
N Your fax WIIInot accept the signal to begin reception (’5 “+”. and ‘*”) If a
document ISloaded In Its feeder.
C
/f you have set Option Sett/ng 8 to “ON” and heara fax tone whenyou answer
the extensionphone, you must press “5” “*”. and “* !fyou are on a tone dlai
phone, or walk over to the fax, pick up the handset. and press the
S key If
you are on a pulse dial only phone.
Thecode used to activate fax reception from a tone dial extensionphone (“5”.
“*”, and “* can be changed if desired. See Option Setting 4 (J’Tel/’F~xRemote
Number”) in Chapter8, “Optional Settings”.
If you do not Intend to use the code for activating fax reception,you can turn
detection of the code off by resetting Opt/on Setting 5. This WIIIensure that the
fax never m/staken/yattempts to begin reception If It detecfsa s/gna/ wnich It
perceives to be similar to “5”.
“+”. and “*” whileyou are /a/k/rigon an extension
phone.
In New Zealand, not all standard telephones and answering lmachlneswill respond
to incoming ringing when connected to the socket of the equipment.
FAX OPERATIONS
3-11
To Next Page
Loading...
