Why are received images distorted on Sharp Fax Machine?
If the received images from your Sharp Fax Machine are distorted, it could be due to noise on the telephone line. Ask the sender to resend the document. Try making a copy or printing a report on your fax machine. If the copy or report is also distorted, your fax machine may need service.
Why answering machine connection does not operate properly on Sharp Fax Machine?
If the Sharp Fax Machine's answering machine connection isn't working, ensure the reception mode is set to A.M. Check that the TEL. LINE socket is connected to the wall and the TEL. SET socket to the answering machine's line socket. The outgoing message should be under 10 seconds, and the Quiet Detect Time should be three or four seconds.
What to do if LINE ERROR appears on Sharp FO-51?
If a LINE ERROR appears on the display of your Sharp Fax Machine, try the transaction again. If the error persists: * Ensure the cord from the TEL. LINE socket to the wall socket is no longer than two meters. * Verify that no modem devices are sharing the same telephone line. * Confirm with the other party that their fax machine is functioning correctly. * Check your telephone line for noise. * Try connecting the fax machine to a different telephone line. * If the problem continues, your fax machine may require service.
Why is the received document faint on my Sharp FO-51 Fax Machine?
If your Sharp Fax Machine prints a faint received document, ask the sender to send documents with higher contrast. If it's still too low, your fax machine may need service. Try making a copy or printing a report to check your machine’s printing ability. Also, make sure you're using the recommended thermal paper.
What to do if Sharp Fax Machine does not respond when pressing keys?
If the Sharp Fax Machine doesn't respond when you press its keys, and no beep sound is heard, unplug the power cord and plug it back in after a few seconds.
Why no dial tone when I pick up the handset on Sharp FO-51?
If you don't hear a dial tone when you pick up the handset or press the SPEAKER key on your Sharp Fax Machine, ensure the handset cord is connected to the correct socket.
Why is reception or copying interrupted on Sharp Fax Machine?
If your Sharp Fax Machine is interrupting reception or copying, it may be overheating. Turn off the power and allow it to cool down.
Why nothing is printed at the receiving end from Sharp FO-51 Fax Machine?
If nothing is printed at the receiving end from your Sharp Fax Machine, ensure that the document for transmission is placed face down in the feeder.
Why automatic document feeding does not work on Sharp Fax Machine?
If the automatic document feeding on your Sharp Fax Machine isn't working for transmission or copying, check the size and weight of the document.
Why does Sharp Fax Machine print in strips?
If your Sharp Fax Machine prints received documents or copies in strips, make sure the operation panel is completely closed by pressing down on both sides.
Details about the fax machine's automatic dialling capabilities.
Information on fax paper and the machine's resolution settings.
Specifies modem speed and internal memory capacity.
Provides essential safety guidelines for operating the fax machine to prevent hazards.
Lists all items included and initial setup points for the fax machine.
Details on connecting the handset, power cord, and telephone line to the fax machine.
Step-by-step guide on loading and replacing the thermal paper roll.
Specifies the size and weight limits for documents to be sent.
Instructions on how to load documents into the feeder for sending.
Explains sending faxes via Normal, Rapid Key, and Speed Dialling methods.
Explains TEL, FAX, TEL/FAX, and A.M. modes for receiving faxes and calls.
Details on how the fax answers calls in TEL/FAX mode and handles voice/fax detection.
How faxes are received into memory when printing is not possible due to paper issues.
Step-by-step instructions for using the fax machine to make copies.
Instructions on how to make and receive voice calls using the fax machine.
Information on Chain Dialling, Searching, Redialling, and Hold.
Guide on how to connect an external answering machine to the fax.
How to set up the fax and answering machine for simultaneous operation.
Settings to improve the response of the answering machine connection.
Instructions on how to use and view Caller ID information received from calls.
How to set up an 'Anti Junk Fax' list to block unwanted numbers and faxes.
Instructions on how to request a fax transmission from another fax machine.
How to print the Telephone Number List and Anti Junk Number List.
Details on the transaction report, its headings, and print conditions.
Guide on cleaning the scanning glass and rollers for optimal fax transmission and copy quality.
Instructions for cleaning the external parts and surface of the fax machine.
Troubleshooting steps for when a 'LINE ERROR' message appears.
Solutions for common dialling and transmission problems, including no dial tone.
Resolving issues with fax reception, blank prints, faint documents, or distorted images.
General| Brand | Sharp |
|---|---|
| Model | FO-51 |
| Category | Fax Machine |
| Language | English |
To Next Page
