Sharp FO-P610 - Sending a Fax by Direct Keypad Dialling

Sending a Fax by Automatic Dialling
35
2. Sending
Faxes
Sending a fax by Direct Keypad Dialling
You can also enter a full number with the number keys and then press the
key to begin dialling. You can use this method to dial a full
number when you don't need to speak to the other party before faxing.
START/MEMOR
Y
1 Load the document(s).
• If desired, press to set the
resolution and/or contrast.
2 Enter the number of the receiving machine by pressing the number
keys.
• If a pause is required between any of the digits to access a special service
or an outside line, press . The pause will appear as a hyphen (two
seconds per pause). Several pauses can be entered in a row.
3 Check the display. If the number of the receiving machine shown is
correct, press .
• If the number is not correct, press to backspace and clear one digit
at a time, and then re-enter the correct digit(s).
R
ESOLUTIO
N
FUNCTION
S
TART/MEMOR
Y
STOP
READY TO SEND
all.book Page 35 Monday, September 29, 2003 4:57 PM