Sharp FP-J50 - FLOW OF INITIAL SETTINGS; Smartphone App Setup; Connecting Purifier to Router; Connecting Smartphone to Purifier

EN-13
ENGLISH
1. Tap “Register” for the air purifier you
would like to register.
2. Follow instructions on the App.
(
XX-XXXX
)
• If the Wi-Fi Indicator lights up after the
notification sound, the connection is
successfully completed.
Light up
The initial settings are completed.
1
INSTALLATION OF THE APP
2
CONNECTION OF THE AIR
PURIFIER AND A ROUTER
3
CONNECTION BETWEEN THE AIR
PURIFIER AND A SMARTPHONE
1. Install designated App in your
smartphone.
• The App can be downloaded from
the below transmission service.
Android: Google Play
iOS: App Store
https://cboard.cloudlabs.sharp.co.jp/smartapp_asean/download/air/
2. Connect your smartphone to the
router and start the App.
Follow instructions on the App.
i.
Confirm “Terms of Service”.
ii.
Input the SHARP ID.
• In case of not having a SHARP ID, please
register a new SHARP ID.
iii.
Input a name for your smartphone.
1. Tap “ ” at the “Home” screen,
and select “Register Device” =>
“Connection with a router”.
NOTE
• If you have stealth settings or MAC filtering
settings on the router, please cancel them.
• The product network ID is displayed as
“AP-SHARP-XX” (where XX is a 2-digit number
below the product MAC address).
2. Follow instructions on the App.
Tap “REGISTER”.
• If the Wi-Fi Indicator lights up after the
notification sound, the connection is
successfully completed.
Light up
• If you do not see the screen above, tap “ ”
at the “Home” screen, and select “Register
Device” => “Already connected with a router”.
FLOW OF INITIAL SETTINGS
FP-J50_EN.indd 13 2020/08/31 14:28:43