EN-5
FILTER INSTALLATION
To maintain the quality of the filter, it is installed in the main unit and packed in plastic bag. Be
sure to remove the plastic bag from the filter before using the main unit.
• Do not operate the main unit without the
filter.
Always be sure to remove the
power plug from the wall outlet.
1
Remove the Back Panel
Pull
2
Remove the plastic bag from the
Filter.
3
Place the Filter within the main unit.
Do not install the filter backwards or the main
unit will not operate properly.
HEPA
Filter
Deodorizing
Filter
Tag
4
Install the Back Panel.
Click
FP-J50_EN.indd 5 2020/08/31 14:28:39
To Next Page
Loading...
Need help?
General
