EasyManua.ls Logo

Sharp GB-X18JR - Remote Controller Operation; Remote Controller Usage

Sharp GB-X18JR
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
E-9
ENGLISH
REMOTE CONTROLLER OPERATION
MODE button
Press to set operation
mode.
ON/OFF button
Press to start or stop
operation.
TEMP. button
Press to set suitable
TEMP.
FAN button
Press to set fan speed.
Loading Batteries
After batteries are installed, the display
shall display icons and letter codes of
all functions.
The life of batteries is about 1 year.
Do not mix new and old batteries or mix
different types of batteries in usage
If the remote controller shall not be
used for a long time, take out the
batteries to avoid liquid leakage and
any subsequent failure.
Load two “R03(AAA)” batteries.
(Accessories)
ACL
Precautions:
Point the remote controller towards the receiver window on the wire controller and press the
desired button.
Ensure there is no obstacle between the remote controller and the receiver window of the
wire controller.
The remote control can send signals from up to 8 metres away.
Never drop or throw at will the remote controller.
Never let any liquid enter the remote controller. Avoid direct sunshine over the remote
controller. Do not place the remote controller in an extremely hot place.
SWING button is invalid for this unit.
Receiver window
GREE_duct_eng_1022.indd 9 08.10.27 3:32:07 PM

Table of Contents

Related product manuals