WIRE CONTROLLER OPERATION
• Press the ON/OFF button, the unit will start up.
• Press the ON/OFF button again, the unit will turn off.
Fan control
(the gures show the relevant display areas)
• Press the temperature setting button (
) to rise the
set temperature.
Press the temperature setting button ( ) to drop the
set temperature.
(Press the buttons once, the temperature setting will
change by 1 °C).
NOTE:
Button lock function
When the ( ) and ( ) buttons are pressed
simultaneously for 5 seconds, the set temperature
indicating area will display “EE” and all buttons response
will be shut off.
To cancel the button lock function, press the two buttons
simultaneously for 5 second again.
Range of temperature setting:
• Heat: 16 °C~30 °C
• Cool: 16 °C~30 °C
• Dry: 16 °C~30 °C
• Fan: No temperature setting function
ON/OFF
Temperature setting
• Press FAN button to change fan speed.
Low Medium Hight Auto
In the DRY mode, the fan speed will be automatically
set to Low.
To Next Page
Loading...
