1 Press the ON/OFF button.
2 Press the MODE button to select
“COOL( ) ” mode.
3 Press the Temperature button to set
the desired temperature.
1 Press the ON/OFF button.
2 Press the MODE button to select
“HEAT( )” mode.
3 Press the Temperature button to set
desired temperature.
In the heating mode, the unit has the
functions of preventing cold air supply
and supplying remaining heat. After
the startup of the compressor, the
indoor fan shall start operation when
the evaporator temperature is high or
equals 35˚C or after the unit has be
started for 45 seconds, so as to prevent
cold air ow blowing out of the unit. After
the stop of the compressor, the indoor
fan will rotate for 120 seconds.
To Next Page
Loading...
