• COOL or DRY mode
One hour after the SLEEP button is pressed, the set
temperature rises by 1˚C, and after 2 hours the set
temperature rises by additional 1˚C .
• HEAT mode
One hour after the SLEEP button is pressed, the set
temperature drops by 1˚C, and after 2 hours the set
temperature drops by additional 1˚C .
• Sleep function cannot be set during Fan mode.
Sleep function setting
Operating mode setting
• Press the MODE button to select the operation mode
COOL DRY FAN HEAT AUTO
COOL mode
The set temperature must be lower than the room
temperature. If the set temperature is higher than the
room temperature, the unit will not produce cooling
effect but will only operate under Fan mode.
DRY mode
Fan motor will run at low fan speed in a specific
temperature range. The dehumidifying effect of this
mode is better than that of the COOL mode and saves
more energy.
HEAT mode
The set temperature must be higher than the room
temperature. If the set temperature is lower than the
room temperature, the heating function will not be
started.
AUTO mode
The unit will adjust its operating mode automatically
according to the ambient temperature.
In heating operation, the outdoor temperature is low
and the humidity is high, frost will produce on the
outdoor unit. The heating efciency will be decreased.
When frosting occurs, the unit will automatically start to
defrost, and “DEFROST” will be displayed.
To Next Page
Loading...
