Sharp HT-X1H

04/10/16 HT-X1H(H)E7.fm
E-64
ENGLISH
TINSZA030SJZZ
HT-X1H
8
References
Troubleshooting chart
Many potential problems can be resolved by the owner without call-
ing a service technician.
If something is wrong with this product, check the following before
calling your authorised SHARP dealer or service centre.
" General
" DVD player
Symptom Possible cause
The power is not
turned on.
!
Is the system unplugged?
!
Are the system connection cables discon-
nected?
No sound is
heard.
!
Is the volume level set to "0"?
!
Are the headphones connected?
!
Are the speaker wires disconnected?
The sounds from
speakers are not
well balanced.
!
Are the speaker wires connected to the
wrong channels?
Noise is heard
during playback.
!
Move the system away from any computers
or mobile phones.
When a button is
pressed, the sys-
tem does not re-
spond.
!
Set the system to the power stand-by mode
and then turn it back on.
!
If the system still malfunctions, reset it. (Re-
fer to page 65.)
Interference or
noise occurs on
the TV image.
!
Is the system placed near TV with internal
aerial? Use an external aerial.
The display on
the main unit is
dark.
!
Is the display in the dimmer mode?
No images are
displayed.
!
Is TV turned on?
!
Is the TV input switched on?
Symptom Possible cause
Even though a
disc is loaded,
"No Disc" is dis-
played.
!
Is the disc loaded upside down?
!
Is the disc very dirty?
!
Does the disc satisfy the standards?
!
Is the system located near excessive vibra-
tions?
Playback sounds
are skipped.
!
Is condensation formed inside the system?
The control but-
tons do not func-
tion. Music or
video playback is
interrupted.
!
Is the disc very dirty?
!
Does the disc satisfy the standards?
!
Is the system located near excessive vibra-
tions?
!
Is condensation formed inside the system?
Pictures and
sound are
skipped.
!
Is the disc very dirty?
!
Is the system located near excessive vibra-
tions?
!
Is condensation formed inside the system?
The system does
not operate even
if the power is on.
!
Is a disc other than a DVD (region number 2
or ALL), super video CD, video CD, audio
CD, CD-R or CD-RW loaded?
Images cannot
be played back.
(Sound is not
heard.)
!
Are the video and audio cables connected
improperly?
!
Is a disc other than a DVD (region number 2
or ALL), super video CD, video CD, audio
CD, CD-R or CD-RW loaded?
!
Is the disc very dirty?
!
Is the disc loaded upside down?
! Is the optical pickup dirty?
!
Is the TV input set to "VIDEO 1/VIDEO 2",
etc.?
!
Is the system turned on?