LC-32L400M
5 – 4
5. Software upgrading
1) Plug off the LCD TV.
2) Insert the USB device to the USB terminal at the LCD TV.
(Make sure that latest software is installed in the USB device)
3) Hold the LCD TV power key and plug on the LCD TV.
4) LCD TV is on and detecting the USB device.
5) A few seconds later, the software upgrading will start automatically.
6) Let the process running & entering verification.
7) Software is successfully installed when the following appears at the end of the process.
8) Plug off the LCD TV & plug on again as usual.
9) LCD TV is running with the latest software.
USB device found
Do not power off
Chip programming
>>>>>>>>
Verifying
Verified
Please re-boot the system
Update Finished
To Next Page
Loading...
Need help?
General