64
LC-32LE530
LC-40LE530
13.9. Standby On/Off Problem
Problem:
Device cannot boot, TV hangs in standby mode.
There may be a problem about power supply. Check 12V_VCC, 5V_VCC and 3V3_VCC
with a voltage-meter. Also there may be a problem about SW. Try to update TV with latest
SW. Additionally it is good to check SW printouts via hyper-terminal (or Teraterm). These
printouts may give a clue about the problem.
13.10. No Signal Problem
Problem: No signal in TV mode.
Check tuner supply voltage; 5V_TUN. Check tuner options are correctly set in Service
menu. Check AGC voltage at RF_AGC pin of tuner.
To Next Page
Loading...
Need help?
General