Sharp LC-40S3H - Before Turning on the Power

12
Preparation
1
Before turning on the power
Notes on installing the TV
• AvoiddirectsunlightandplacetheTVinawell-ventilatedlocation.
• PlacetheTVinalevellocation.
• DonotturnonthepoweroftheTVbeforeconnectingtheACcord.
• IfthereareanyprotectiveplasticsheetsontheTVcabinet,pleasetakethemoffbeforeconnecting.
Plug the AC cord in to the AC outlet.
• PlacetheTVclosetotheACoutlet,andkeepthepowerplugwithinreach.
• DisconnecttheACcordfromtheACoutletiftheTVwillnotbeusedforalongperiodoftime.
TV (rear view)
Connecting the antenna cable
To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of
connections that are used for coaxial cable.
Standard
DIN45325plug
(IEC169-2)
75-ohmcoaxial
cable (round cable)
Room antenna terminal
(75-ohmtype)
Antenna cable
(commerciallyavailable)
Connecting external devices
Seepage13forconnectingexternalequipment,suchasaVCRandDVDplayer.
2
3
4
To antenna terminal
ACcord
ACoutlet
CAUTION
• To prevent risk of electric shock , do not touch un-insulated parts of any cables with the AC cord connected.
Bundling the cables
Asthepictureillustrated,insertthecableclipintotheholeontheTV,andputthecableintothecableclip
for banding.