Sharp LC-40S3H

29
Other useful features
• TheUSB1andUSB2terminalscannotbe
connectedwithUSBharddrivesatthesametime.
• WhenconnectingaUSBharddiskdrive,besureto
useaharddiskdrivewithanACadapter.
• DonotremovethememorydevicefromtheTV
whiletransferringles.
• DonotinsertandremoveaUSBmemorydevice/
USBharddiskdrivetoandfromtheTVrepeatedly.
• Whenusingacardreader,besuretoinsertMemory
rstbeforeusingthecardreader.
• TheTVmaynotbeabletorecognisethecard
reader.
• PleasefollowtherulesbelowwhentheTVis
displayingtheleoftheUSBdevice:
—PleasedonotturnofftheTVdirectly.
—Pleasedon’tdisconnecttheUSBdevicedirectly.
—PleasebesuretoexitfromUSBinterfacebefore
removingtheUSBdevice,otherwiseyoumaylose
thedata,damagethedeviceorTVsystemmaynot
work properly.
• IftheTVconnectswithUSB-HUB,theTVmaynot
beabletorecogniseallUSBmemorydevice.
NOTE
• DependingontheUSBmemorydevice,theTVmaynotbe
able to recognise the data.
• ItmaytaketimetoreadthedataiftheUSBmemorydevice
containsmanylesorfolders.
• Externalsubtitlesforsomevideolesmaynotbe
supported.
YoucanconnectaUSBmemorydeviceoraUSBhard
diskdrive(HDD)totheTVtoenjoyviewingpictures,
listeningtomusic,andwatchingvideos.
InserttheUSBmemorydevicewithrecordedphotos,
musicorvideosintotheUSB1orUSB2terminalon
theTV.
CAUTION
• Do not use the USB extension cable, otherwise it may
cause the TV does not work properly.
• Please insert the USB device after the TV is powered
on properly.
Press SMART to display the smart home,
select “Multimedia” and then press ENTER. Or
you can press MULTIMEDIA to display the
mode quickly.
1
Press
a
/
b
to select the desired folder , and
then press ENTER. Press
a
/
b
to select the
desiredle,andthenpressENTER.
• Selectthe“Back”shownonscreen,youcanexit
into the upper folder.
Press B (blue)todisplaytheUSBmediaoperation
menu. Press
c
/
d
toselecttherelevantfunctions,
and then press ENTER. After the operation, press B
(blue) again to hide the operation menu.
ToknowthebuttonsforUSBmediaoperationin
detail,pleaseseepage30.
3
4
2
Press
a
/
b
toselectthedeviceordiskdrive
you want, and then press ENTER.
Connecting a USB memory device
Playing back files on a USB memory
device