EasyManuals Logo

Sharp LC-40SH340K Service Manual

Sharp LC-40SH340K
106 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
5
LC-40SH340E
LC-40SH340K
Cautions regarding use in high and low temperature environments
 When the unit is used in a low temperature space (e.g. room, offi ce), the
picture may leave trails or appear slightly delayed. This is not a malfunc-
tion, and the unit will recover when the
temperature returns to normal.
 Do not leave the unit in a hot or cold location. Also, do not leave the
unit in a location exposed to direct sunlight or near a heater, as this
may
cause the cabinet to deform and the LCD panel to malfunction. Storage
temperature: –20°C to +60°C
.
As a part of our policy of continuous im-
provement, SHARP reserves the right to
make design and specifi cation changes
for product improvement without prior
notice. The performance specifi cat
ion fi g-
ures indicated are nominal values of pro-
duction units. There may be some devia-
tions from these values in individual unit
s.
ELECTRICAL SPECIFICATIONS
Digital
Reception
MHEG-5 ENGINE compliant with ISO/IEC 13522-5 UK engine Pro l e 1
for UKObject carousel support compliant with ISO/IEC 135818-6 and UK DTT pro l e
Frequency range: 474-850 MHz for UK models
170-862 MHz for EU models
Transmission standard: DVB-T. MPEG-2, MPEG-4
Demodulation: COFDM with 2K/8K FFT mode
FEC: all DVB modes
Video: MP@ML, PAL, 4:3/16:9
Audio: MPEG Layer I&II 32/44.148kHz.
Only for LC-40SH340E
Digital Reception (DVB-C)
(DVB-T)
Speci cations
TV BROADCASTING
PAL/SECAM B/G D/K K’ I/I’ L/L
RECEIVING CHANNELS
VHF (BAND I/III)
UHF (BAND U)
HYPERBAND
NUMBER OF PRESET CHANNELS
1000
CHANNEL INDICATOR
On Screen Display
RF AERIAL INPUT
75 Ohm (unbalanced)
OPERATING VOLTAGE
220-240V AC, 50Hz.
AUDIO
German + Nicam Stereo
AUDIO OUTPUT POWER (W
RMS.
) (10% THD)
2 x 6
POWER CONSUMPTION (W)
150 W (max)
< 0,5 W (Standby)
PANEL
16:9 display, 40” Screen Size
DIMENSIONS (mm)
DxLxH (With foot): 232 x 970 x 657
Weight (Kg): 18,30
DxLxH (Without foot): 90,5 x 970 x 613
Weight (Kg): 15,60
Transmission Standards:
DVB-C, MPEG2, DVB-C, MPEG4
i. DEMODULATION
-Symbolrate: 4.0 Msymbols/s to 7.2 Msymbols/s
- Modulation: 16-QAM , 32-QAM ,64-QAM, 128-QAM
and 256-QAM
ii. VIDEO
- All MPEG2 MP@ML formats with up-conversion and
 l tering to CCIR
601 format.
-CVBS analogue output
iii. AUDIO
-All MPEG1 Layer 1 and 2 modes
-Sampling frequencies supported are 32, 44.1 & 48
kHz

Table of Contents

Other manuals for Sharp LC-40SH340K

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp LC-40SH340K and is the answer not in the manual?

Sharp LC-40SH340K Specifications

General IconGeneral
Teletext functionYes
DVI portNo
HDMI version1.3
SCART ports quantity1
Product colorBlack
Mercury content60 mg
Panel mounting interface400 x 400 mm
Display diagonal40 \
Display technologyLCD
Display diagonal (metric)102 cm
Annual energy consumption177 kWh
Audio decodersDolby Digital, Dolby Virtual Speaker
RMS rated power12 W
Power consumption (standby)0.5 W
Analog signal format systemNTSC, PAL, SECAM
Digital signal format systemDVB-T
Weight and Dimensions IconWeight and Dimensions
Depth (with stand)323 mm
Width (with stand)970 mm
Height (with stand)657 mm
Weight (with stand)18300 g
Depth (without stand)91 mm
Height (without stand)613 mm

Related product manuals