EasyManua.ls Logo

Sharp LC-40SH340K - Configuring Sound Settings; Operating Sound Settings Menu Items; Sound Settings Menu Items; Configuring Your TVs Settings

Sharp LC-40SH340K
106 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
26
LC-40SH340E
LC-40SH340K
5. AUDIO AMPLIFIER STAGE WITH AZAD2102(U163, U164)
5.1.General Description
17MB60 uses two 2,5W Class D Mono Audio Amplifers for from 16” to 24” TVs. AZAD2102B is a 2.9 Watts
-free
class-D audio power amplifier in a 1613 mm x 1613 mm wafer chip scale package (WCSP). AZAD2102B uses
Current-switch technology to achieve high performance class-d amplifier that features 0.03% THD, 85%
efficiency, –70 dB PSRR, to improve RF-rectification immunity. AZAD2102B provide a Vibration-Spectrum
modulation clock for PWM Output. This vibration frequency is around 10KHZ shift (+/- 5KHZ of Fpwm).
The advantage of the small size package (WCSP) makes AZAD2102B very suitable for mobile phone and
PDA device application. And the Class-D amplifier structure let AZAD2102B to have highly efficiency
power consumption than Class-AB amplifier. AZAD2102B can shrink the application board, reduce system
cost, and external components.
ESD level protection I/O embedded in AZAD2102B. For general applications, doesn’t need to add extra
ESD protection device (like Varistors) in application system for AZAD2102B’s I/O.
5.2.Features
x CMOS Technology
x High Efficiency 85%
x High PSRR 70dB at 217Hz
x Differential OP-amp Input
x AZAD2102B provides Vibration-Spectrum Modulation clock for reduce EMI
x Provide Mute function(set Mute_B to GND will go into Mute status)
x For the input stage AZAD2102B built-in a 10Kohm resistors (Gain setting=29.5dB)
x Maximum Battery Life and Minimum Heat
x Efficiency With an 8-
x 3.5 mA Quiescent Current
x Output Power at 10% THD
x 
x 1.45Watts at 
x 
x 
x 
x 
x Eliminate Power on and Power-off “Pop” noise
x A Fewer External Components
x Optimized PWM Output Stage Eliminates LC Output Filter
x Internally generate 290 kHz Switching Frequency to eliminate Capacitor and Resistor
x Improve PSRR (–70 dB) and Wide Supply Voltage (3.0 V to 5.5 V)
x Fully Differential Design Reduces RF Rectification
x This chip has been built-in a very strong ESD protection.
x System level ESD 4KV (IEC 61000-4-2 ESD Contact Level)
x Wafer Chip Scale Package (WCSP)
x TSSOP Package with Exposed Pad

Table of Contents

Other manuals for Sharp LC-40SH340K

Related product manuals