Sharp lc-60lx531h User Manual

15
Programme setup
Digital settings
You can reconfigure D-TV services settings automatically
or manually.
1
Press MENU and the MENU screen displays.
2
Press
c
/
d
to select “Setup”.
3
Press
a
/
b
to select “Digital programme
setup”, and then press
ENTER. If you have
already set the password, enter it here.
• See page 20 for setting a password.
4
Press
a
/
b
to select the desired menu item,
and then press
ENTER.
5
Press
c
/
d
to select “Yes”, and then press
ENTER.
H
Auto search (Digital)
Use this menu to add new services automatically after
auto installation has been completed.
H
Manual search (Digital)
Add new services within a specified frequency band.
•
Press
c/d to select the frequency and then press
ENTER.
H
Manual adjust (Digital)
Configure various settings for each service using the
Colour (
R, G, B) buttons.
Digital programme setup]
1
Press
a
/
b
to select desired service.
2
Press the colour button on the remote control
corresponding with the item you want to
reconfigure.
• Each time the colour button is pressed, you can
switch the corresponding operation on/off.
Buttons for Manual adjust operation
Menu
items
Remote
control
buttons
Description
Lock R When the service is locked,
you must enter your password
whenever you tune to the service.
CH
Skip
G Services with “Skip” are passed
over when pressing
r
/
s
in the
TV/remote control unit.
Sort B The item position of services can be
sorted.
Checking signal
information (Continued)
H
Checking signal information
Press
a
/
b
to select “Signal information”.
Supply voltage
4
Position and align the antenna so that the
maximum possible values for “Signal strength”
and “Signal quality” are obtained.
NOTE
• The values of “Signal strength” and “Signal quality” indicate
when to check the appropriate alignment of the antenna.
Auto installation
You can run auto installation again, even after setting
up the preset channels.
1
Press MENU and the MENU screen displays.
2
Press
c
/
d
to select “Setup”.
3
Press
a
/
b
to select “Auto installation”, and
then press
ENTER.
4
If you have already set the password, enter it
here.
• See page 20 for setting a password.
5
Press
c
/
d
to select “Yes”, and then press
ENTER.
6
Press
a
/
b
to select the desired language,
and then press
ENTER.
Press
a
/
b
/
c
/
d
to select “D-TV”, “A-TV” or
“A-TV + D-TV”, and then press
ENTER.
Press
a
/
b
to select the desired sound
system, and then press
ENTER.
• Sound system is selectable when the signal search
is set to “A-TV” or “A-TV + D-TV” mode only.
You do not need to do anything during the
auto search. Press
MENU to exit.
LC40LX530H_pg01-16_EN.indd 15 2011-6-27 16:58:19

Sharp lc-60lx531h Specifications

General

Brand	Sharp
Model	lc-60lx531h
Category	LCD TV
Language	English