Sharp lc-60lx531h User Manual

23
Selected
item
Description
Fixed • Sound via speakers is adjusted with
VOL
k
/
l
on the remote control unit
or the TV.
• Sound via the AUDIO OUT terminals is
adjusted and constantly outputs.
Variable • Sound via the AUDIO OUT terminals is
adjusted with VOL
k
/
l
on the remote
control unit or the TV.
• Sound via speakers/headphone is muted .
Press MENU and the MENU screen displays.
1
Press
c
/
d
to select “Option”.
2
Press
a
/
b
to select “Output Volume Select”,
and then press ENTER.
3
Press
c
/
d
to select “Fixed” or “Variable”, and
then press ENTER.
4
Allows you to select what controls the audio output.
NOTE
• The “Audio” menu cannot be operated when “Variable” is selected.
Variable Fixed
Audio output terminal setting
H
Output Volume Select
H
Auto volume
Different sound sources, fairly often do not have the
same volume level, for example the changing from
movie to the advertisements. Auto volume solves this
problem and equalises the volume levels. (On, Off)
H
Clear voice
This function emphasises speech against background
noise for greater intelligibility. (On, Off)
NOTE
• This function cannot be operated when “SRS TS HD” is set to “Off”.
H
Audio only
When listening to music from a music programme, you
can set the display off and enjoy audio only.
Selected item Description
On Audio is output without screen image.
Off Both screen images and audio are output.
NOTE
• When you make operations that change the picture on the TV
such as by changing the input source, the Audio only function
is set to “Off”.
H
Game play time
This function displays the elapsed game time so you do
not lose track of the time.
To display the elapsed time, select “GAME” under
“AV mode” for the input mode of the terminal connected
to the game console before starting the game.
Selected item Description
On When using HDMI 1-3,INPUT 4-7 the AV
MODE is change to “Game”, the elapsed
time is displayed every 30 minutes.
Off There is no display.
H
Colour system
You can change the colour system to one that is
compatible with the image on the screen. (Auto, PAL,
SECAM, NTSC 3.58, NTSC 4.43, PAL-60)
NOTE
• Factory preset value is “Auto”.
• If “Auto” is selected, colour system for input signal is
automatically set. If an image does not display clearly, select
another colour system (e.g. PAL, NTSC 4.43).
• “Colour system” is selectable only when inputting an S-
VIDEO or composite signal.
H
Fine sync. (PC input mode only)
Adjusting the PC image automatically
Auto sync.
This function enables the screen to be automatically
adjusted to its best possible condition when the
analogue terminals of the TV and PC are connected
with a commercially available RGB cable, etc.
NOTE
• Auto sync. is likely to succeed when an input PC image has
wide vertical stripes (e.g. pattern with high contrast stripes,
or cross-hatched).
It may fail when an input PC image is solid (low contrast).
• Be sure to connect the PC to the TV and switch it on before
starting Auto sync.
Option menu (Continued)
LC40LX530H_pg17-26_EN.indd 23 2011-6-27 16:59:07

Sharp lc-60lx531h Specifications

General

Brand	Sharp
Model	lc-60lx531h
Category	LCD TV
Language	English