Software Updating Procedure
• 1. Turn on the AC power.
• 2. Insert the upgrading USB fl ash memory for upgrade into the service slot.
(After a while, an external input changes into USB automatically.)
• 3. Use the Menu button and cursor keys (◄/►/▲/▼), Ch keys (Up/Down) of R/C or on the set to select:
Menu - Setup - Information - Software update- USB update on OSD menu.
• 4. The message (Insert the USB memory device contains the software update fi le) shows up.
Push OK when if there is no problem.
Issued by:
CE After Sales Service
July 2011
Software Updating
To Next Page
Loading...
