Software Updating Procedure (cont...)
8. When all the procedures are complete, the following upgrade success screen shows up.
The new software version can be confirmed on screen.
After a while, Turn off power and boot-up automatically.
TV is restarted automatically, the AC cord need not be pulled out.
Issued by:
CE After Sales Service
July 2011
Software Updating
9. After boot-up, the following caution shows up.
Select OK when if there is no problem.
Software update is completed, please remove the USB memory device.
Then get the set started and call the process adjustment screen (Top Page) to check the main software version.
Then get the set started and call the process adjustment screen to check the main software version.
To Next Page
Loading...
