Sharp MX-2010U

JOB LOG ERROR CODES
SHARP
46
Error
Job Log / Status Monitor Message
Comment
0229
The requested job could not be completed
correctly due to the following reason:
(Booklet printing: Too many pages)
022A
(Booklet printing: Incorrect output tray selection)
022B
(Covers/Inserts: Incorrect setting parameter)
022C
(Tandem Printing: Incorrect setting parameter)
022D
(Tandem Printing: Not setting)
022E
The requested job is printed, but could not
be stored because:-
(Document filing: Selected folder does not exist)
022F
(Document filing: Incorrect folder password)
0230
(Document filing: No. of jobs exceeded the limit)
0231
(Document filing: Selected folder does not exist).
The job is stored to the default folder.
0232
The requested job is printed, but could not
be stored in the selected folder because:-
(Document filing: Selected folder does not
exist)The job is stored to the default folder.
0233
(Inserter: Incorrect output tray selection)
0234
(Inserter: Failure)
0235
The requested job could not be completed
correctly due to the following reason:
(Inserter: No function)
0236
(Covers/Inserts: Prohibited)
0237
The requested job is printed, but could not
be stored in the selected folder because:-
(Document filing: Incorrect folder password)
The job is stored to the default folder.
0238
The requested job could not be stored in
the selected folder because:-
(Document filing: Incorrect folder password)
The job is stored to the default folder.
0239
The requested job is printed, but could not
be stored due to the following reason:
(Disabling of Quick File Mode)
023A
(Disabling of Sharing Mode)
023B
(Disabling of Confidential Mode)
023C
(Disabling of Storing to the selected folder)
023D
(Disabling of Document Filing)
023E
(Disabling of Print Jobs Other Than Hold Job)
023F
The requested job is stored in "Quick File"
folder, but could not be printed because:-
(Disabling of Print Jobs Other Than Hold Job)
0240
The requested job is printed, but could not
be stored due to the following reason:
(Retention printing: Prohibited)
0241
The requested job could not be completed
correctly, due to the following reason:
(Offset: Disabled)
0242
The requested job is stored, but could not
be printed due to the following reason:
(Offset: Disabled)
0243
(Disabling of printing)
0244
The requested job is printed, but the
following phenomenon occurred:
(Invalid user)
0245
The requested job is stored, but the
following phenomenon occurred:
(Invalid user)
0246
The requested job is printed, but the
following phenomenon occurred:
(Number of allowed pages exceeds the limit)
0247
(Print quality: Setting parameter modified)
0248
The requested job is stored, but the
following phenomenon occurred:
(Print quality: Setting parameter modified)
0249
The requested job could not be completed
correctly due to the following reason:
(Colour mode: Disabling of full colour)
024A
(Colour mode: Disabling of Black and White)
024B
(Only 2-sided print approved)
024C
(Only 1-sided print approved)
024D
Colour of Document control function has
been changed on the specified job.
(Colour setting of Document control function:
Allow User to select the Print Colour is disabled)
024E
Document control function has been
enabled automatically on the specified job.
(Print setting of Document control function:
Always print)