Job Log / Status Monitor Message
The requested job was cancelled due to the
following reason:
(Disabling of Print Jobs other Than Hold Job and
Disabling of Confidential Mode)
(Disabling of Print Jobs other Than Hold Job and
Disabling of Storing to the selected folder)
(Disabling of Print Jobs other Than Hold Job and
Disabling of Document Filing)
(Disabling of Print Jobs other Than Hold Job and
Disabling of Quick File Mode)
(Retention printing: Prohibited)
(Hard disk full or memory full)
(Number of allowable pages exceeded the limit)
(Print quality: Conflict of setting parameter)
(PCL is not available) Check the printer driver.
(SPLC is not available) Check the printer driver.
(PDF is not available) Check the printer driver.
You don't have the authority to use this
function. The requested job was cancelled
due to the following reason:
(Colour mode: Disabling of full colour)
(Colour mode: Disabling of B/W)
(Colour mode: Disabling of B/W and full colour)
(Only 2-sided print approved)
(1-sided/2-sided print disabled)
The requested job was cancelled due to the
following reason:
(Folding Unit: Prohibited)
(B/W or Auto job is sent when Document control
pattern is set to always print in colour.)
(Folding Unit: Incorrect paper size)
(Staple: Slant staple cannot be used)
(Tandem Printing: Disabling of Slave M/C Mode
(Colour mode: Disabling of 3 colour)
(Colour mode: Disabling of 2 colour)
(Colour mode: Disabling of Single colour)
(XPS is not available): Please check your printer
Your job has been cancelled by user.
Your store job has been deleted by user
To Next Page
Loading...
Need help?
General
