112
1
Place the original.
Place the original in the document feeder tray or on the
document glass as appropriate for the functions stored in the
program.
2
Touch the [Special Modes] key.
3
Touch the [Program] key.
4
Call up the stored program.
(1) Touch the desired program key.
(2) Touch the [OK] key.
5
Select additional settings.
Select any settings or functions that cannot be stored in a
program. The following items can be selected.
• Image Settings : Original Scan Size, Send Size, Two-Sided
Scanning, Format, Colour Mode
• Send settings
• Special modes : Timer Transmission, Card Shot, Job Build,
Slow Scan Mode, File, Quick File,
Transaction Report
• You can touch the key to display a list of the selected special mode settings or two-sided scanning. To return
to the previous screen after checking the settings, touch the [OK] key.
• The screen that appears will vary depending on the destination stored in the program.
• The mode cannot be changed here.
• Functions stored in the program cannot be cancelled here.
To Next Page
Loading...
Need help?
General
