Sharp MX-2300N - Page 480

64
4
Check the destinations.
(1) Check the destinations.
(2) Touch the [OK] key.
To cancel an entered destination...
(1) Touch the key of the destination that you
wish to cancel.
(2) Touch the [Yes] key.
If you do not wish to cancel the destination, touch the [No]
key.
(3) Touch the [OK] key.
5
Press the [BLACK & WHITE START] key
().
Scanning begins.
• If you inserted the original pages in the document feeder
tray, all pages are scanned.
A beep will sound to indicate that scanning is finished.
•
If you are scanning the original on the document glass, scan
each page one page at a time.
When scanning finishes, place the next original and press the
[BLACK & WHITE START] key ( ). Repeat until all pages
have been scanned and then press the [Read-End] key.
A beep will sound to indicate that scanning is finished.
To cancel scanning...
Press the [STOP] key ( ).
• A broadcast transmission can be used in combination with the timer transmission function to transmit at night or any other
desired time. A broadcast transmission can also be used in combination with other convenient functions.
• The broadcast transmission can include Scan to E-mail and Internet fax destinations. In this case, the image sent to the
Scan to E-mail and Internet fax destinations will be black and white.
Address Review
001 AAA AAA
CCC CCC
EEE EEE
BBB BBB
DDD DDD
FFF FFF
003
005
002
004
006
1/1
OK
CcTo
(1) (2)
Address Review
001 AAA AAA
CCC CCC
EEE EEE
BBB BBB
DDD DDD
FFF FFF
003
005
002
004
006
1/1
OK
CcTo
(1)
Deselect the address?
FFF FFF
No Yes
(2)
Address Review
001 AAA AAA
CCC CCC
EEE EEE
BBB BBB
DDD DDD
003
005
002
004
1/1
OK
CcTo
(3)