Sharp MX-2300N - Table of Contents

67
● Disabling of Optional Paper Drawer*
4
Disable 94
● Disabling of Tray Setting Disable 94
● Disabling of Finisher*
5
Disable 94
● Disabling of Offset Disable 94
● Disabling of Stapler*
5
Disable 94
● Saddle Stitch Position Adjust*
6
0.0 mm 94
● Disabling of Punch*
7
Disable 94
● Disabling of Color Mode*
8
Disable 94
● Auto Paper Selection Setting Plain Paper 95
● Registration Adjustment
95
X Auto Adjustment –
● Optimization of the Hard Disk – 95
● Tandem Connection Setting
95
X IP Address of Slave Machine 0.0.0.0
X Port Number 50001
X Disabling of Master Machine Mode Disable
X Disabling of Slave Machine Mode Disable
● Clear All Job Log Data – 95
● Detect Standard in Auto Color Mode 3 95
■ Copy Settings
96
● Initial Status Settings
96
X Color Mode Full Color
X Paper Tray Varies depending on the machine configuration
X Exposure Type Auto
X Copy Ratio 100%
X 2-Sided Copy 1-Side to 1-Side
X Output –
● Exposure Adjustment
96
X Color
 Document Glass 5
 Document Feeder 5
X B/W
 Document Glass 5
 Document Feeder 5
● Rotation Copy Setting Enable 96
Item Factory default setting Page