48
Settings
*1 When a right tray is installed.
*2 When a saddle stitch finisher or finisher is installed.
*3 This setting is used to adjust the line width of vector graphics (black and white printing only). Except for CAD and
other specialized uses, there is normally no need to change this setting. For more information on the values that can
be set, see the table below.
Values for the line thickness setting
* All lines are minimum line width.
Item Settings Factory default setting
Copies 1 - 999 sets 1
Orientation • Portrait
• Landscape
Portrait
Default Paper Size 11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11",
7-1/4" x 10-1/2", 5-1/2" x 8-1/2", A3, B4, A4, B5,
A5, 8k, 16k
8-1/2" x 11"
Default Output Tray*
1
•Center Tray
•Finisher Tray
*2
• Right Tray
Center Tray
(Finisher Tray*
2
)
Default Paper Type Plain Paper, Letter Head, Pre-Printed,
Pre-Punched, Recycle Paper, Color
Plain Paper
Line Thickness*
3
0 - 9 5
2-Sided Print • 1-Sided
• 2-Sided (Book)
• 2-Sided (Tablet)
1-Sided
Color Mode •Color
•B/W
B/W
N-Up Print •1-Up
•2-Up
•4-Up
1-Up
Settings 0 1 2 3 4 5 6 7 8 9
Percentage minimum
line width*
50% 75% 90% 95% 100% 105% 110% 125% 150%
To Next Page
Loading...
