Sharp MX-2300N

148
If you cannot edit or delete a one-touch individual or group key...
Individual keys and group keys cannot be edited or deleted in the following situations:
• The key is used in a reserved transmission or a transmission that is in progress.
• The key is included in a group key.
• The key is included in a program.
• The key is specified as an end receiving machine in an F-code relay broadcast transmission.
☞ Editing and Deleting F-code Memory Boxes (page 157)
• The key is specified as a forwarding destination as explained in "FORWARDING A RECEIVED FAX TO AN E-MAIL
ADDRESS (Inbound Routing Settings)" (page 104).
If the key is used in a reserved transmission or a transmission that is in progress, cancel the transmission or wait until it is
completed and then edit or delete the key.
If the key is included in a group, first delete the key from the group and then edit or delete the key.
If the key is specified as a forwarding destination, cancel the forwarding destination setting and then edit or delete the key.