Sharp MX-2300N

155
5
Enter a box name.
(1) Touch the [Box Name] key.
The box number (No.) that automatically appears is the
lowest number that has not yet been programmed.
(2) Enter a box name on the text entry screen
that will appear.
Enter up to 18 characters for the name.
For the procedure for entering text, see "6. ENTERING
TEXT" in the User's Guide.
6
Touch the [Sub Address] key.
7
Enter a sub-address and passcode.
(1) Enter a sub-address.
Use the numeric keys to enter a sub-address (maximum
of 20 digits).
(2) Enter a passcode.
Touch the [Passcode] key and enter a passcode with the
numeric keys (maximum of 20 digits).
If you do not need to store a passcode, go to the next
step.
(3) Touch the [OK] key.
• " " and "#" cannot be used in a sub-address.
• When the [Passcode] key is touched, "/" appears.
If an incorrect entry is made...
Press the [CLEAR] key ( ) and enter the correct digits.
8
Touch the [Recipient] key.
F-Code Memory Box / Relay Broadcast
No.001
ExitNext
Box Name
Sub Address
Recipient
F-Code Memory Box / Relay Broadcast
No.001
ExitNext
Box Name
Relay Broadcast
Sub Address
Recipient
F-Code Memory Box / Relay Broadcast
Next Exit
OKCancel
No.001
Sub Address / Passcode
Enter the sub address / passcode via the 10-key pad,then press [OK].
Passcode
000000 / 111111
(1) (2) (3)
F-Code Memory Box / Relay Broadcast
No.001
ExitNext
Box Name
Sub Address
Recipient
000000 / 111111
Relay Broadcast