Sharp MX-2300N

158
6
Example: Editing/deleting a memory box for polling
memory
To edit the box...
Touch the key of the item that you wish to change and then
change the item in the same way as you programmed it. When
finished, touch the [Exit] key.
☞ Programming an F-code Memory Box (Polling Memory)
(page 149), Programming an F-code Memory Box
(Confidential) (page 151), Programming an F-code
Memory Box (Relay Broadcast) (page 154)
To delete the box...
Touch the [Delete] key and then touch [Yes] key in the deletion
confirmation screen.
To edit or delete another memory box...
After finishing the above step, repeat the procedure from step 5.
7
Example: Editing/deleting a memory box for polling
memory
Touch the [Exit] key.
No.001
ExitDelete
F-Code Memory Box / Polling Memory
Box Name
Polling Memory
000000/111111
Sub Address
Memory Box / Modify/Delete
Select memory box to modify/delete.
Exit
Polling Memory
1/1
AAA BBB