64
4
Place the box on a flat surface.
Place a sheet of newspaper on the surface before placing the
box.
Do not point the holes down as used toner will spill out.
5
Remove the seals around the holes.
Grasp the edge of each seal and pull it out toward you.
There are 5 seals. Remove all of the seals.
6
Plug the holes.
Grasp the edge of each black seal and insert it into a hole in the
box to plug the hole.
• There are 5 seals. Plug all of the holes.
• Do not discard the waste toner box. Place it in a plastic bag and keep it until your service technician comes to
perform maintenance. Your service technician will collect the waste toner box.
7
Install the new waste toner box.
Insert the box from above at a slant. (The direction opposite to
when you removed it.)
To Next Page
Loading...
