Sharp MX-2600N User Manual

1-64
BEFORE USING THE MACHINE
Contents
REPLACING THE TONER CARTRIDGES
Be sure to replace the toner cartridge when the message "Change the toner cartridge." appears.
In copy mode
• If any one of the toner colors runs out (including black toner), color printing will not be possible. If Y, M, or C toner runs out
but Bk toner remains, black and white printing will still be possible.
• Be sure to install 4 toner cartridges (Y/M/C/Bk).
OK
Change the toner cartridge.
( )
Ready to scan for copy.
( Change the toner cartridge.)
Ready to scan for copy.
( Toner supply is low.)
Ready to scan for copy.
( )
Colors that are running low or have run out of toner are indicated in ( ).
: Yellow toner, : Magenta toner, : Cyan toner, : Black toner
Replace the toner cartridges of the indicated colors.
Y
M C
Bk
If you continue to use the machine without replacing
the cartridge, the following message will appear
when the toner runs out.
When the message appears in the message display,
replace the toner cartridge for the indicated color.

Sharp MX-2600N Specifications

Power

power requirements	230 ~240V AC, 50/60 Hz
power consumption	1.84 kW
warm-up time	Less than 60 sec.

System Memory

copier memory	Standard 1, 024MB, max. 2, 048MB
printer memory	Standard 512MB, max. 1, 536MB
HDD	80GB

Paper Handling

standard paper capacity	1, 100 sheets
maximum paper capacity	5, 600 sheets
paper weight (tray)	60 g/m² to 209 g/m²

Weight and Dimensions

dimensions	620 x 695 x 950 mm
weight	Approx. 112 kg