7-101
SYSTEM SETTINGS
Contents
System Settings for Fax (Administrator) List
When the system settings for fax are accessed with administrator rights, the following items appear. For information on
the general settings, see "System Settings for Fax (General) List" (page 7-95).
Image Send Settings
•
For the procedure for using the system settings (administrator), see "Accessing the System Settings (Administrator)" (page
7-26).
• Depending on the machine specifications and peripheral devices installed, it may not be possible to use some settings.
Item Factory default setting Page
■ Image Send Settings
7-103
● Fax Settings 7-103
X Fax Default Settings 7-103
Dial Mode Setting Tone 7-103
Auto Wake Up Print Enabled 7-103
Pause Time Setting 2 sec. 7-103
Fax Dest. Confirmation Mode Disabled 7-103
Speaker Settings
7-103
• Speaker Volume: 5
• Ringer Volume Volume: 5
• Line Monitor Volume: 5
• Fax Receive Complete Signal Volume: 5; Tone Pattern: 3
Transmission Complete Sound Time
Setting: 3 sec.
• Fax Send Complete Signal Volume: 5; Tone Pattern: 3
Transmission Complete Sound Time
Setting: 3 sec.
• Fax Communication Error Signal Volume: 5; Tone Pattern: 3
Transmission Complete Sound Time
Setting: 0.3 sec. each
Remote Reception Number Setting 5 7-103
Original Print on Transaction Report Print Out Error Report Only 7-104
To Next Page
Loading...
