Sharp MX-2600N User Manual

6-4
DOCUMENT FILING
Contents
BEFORE USING DOCUMENT FILING
This section provides information that you should know before using the document filing function.
Folders
Three types of folders are used to store files by document filing.
Quick File Folder
Documents scanned using the [Quick File] key are stored in this folder. A user name and file name are automatically
assigned to each job.
Main Folder
Documents scanned using the [File] key are stored in this folder.
When you store a job in the Main folder, you can specify a previously stored user name and assign a file name.
A password can also be set when storing a file ([Confidential] save).
Custom Folder
Folders with custom names can be created inside this folder.
When a document is scanned using the [File] key and a folder is selected, the document is stored in the specified folder.
Like the Main folder, a custom folder allows you to specify a previously stored user name and assign a file name when storing a job.
Passwords can be established for custom folders and for files saved in custom folders.
Items convenient to store
When storing a job using "File" or "Scan to HDD", it is convenient to store the items below. These settings are not
needed when storing a job using "Quick File".
A maximum of 1000 custom folders can be created on the hard drive.
User Name
This is necessary if you will be assigning a user name to stored files. User names are stored in "User List" in
the system settings (administrator). A user name is also used as a search condition when searching for a file.
Custom Folder
The Main folder is initially available as a location for storing files by "File" and "Scan to HDD". When
custom folders have been created using "Document Filing Control" in the system settings, a custom
folder can be specified as a location for storing files. A password can also be established for a custom
folder to restrict access to the folder.
My Folder
"My Folder" is specified using "User List" in the system settings (administrator). A previously created
custom folder can be selected as "My Folder", or a new folder created as "My Folder". When "My
Folder" has been configured and user authentication is used, "My Folder" will always be selected as
the destination of "File" and "Scan to HDD".
• System Settings: Document Filing Control (page 7-24)
This is used to create custom folders for document filing. A password can also be established for a custom folder.
• System Settings (Administrator): User List
This is used to store a user name and specify a folder as "My Folder".
Folders on the hard drive
Quick File
Folder
Main Folder
Custom Folder

Sharp MX-2600N Specifications

Power

power requirements	230 ~240V AC, 50/60 Hz
power consumption	1.84 kW
warm-up time	Less than 60 sec.

System Memory

copier memory	Standard 1, 024MB, max. 2, 048MB
printer memory	Standard 512MB, max. 1, 536MB
HDD	80GB

Paper Handling

standard paper capacity	1, 100 sheets
maximum paper capacity	5, 600 sheets
paper weight (tray)	60 g/m² to 209 g/m²

Weight and Dimensions

dimensions	620 x 695 x 950 mm
weight	Approx. 112 kg