Sharp MX-2600N User Manual

7-38
SYSTEM SETTINGS
Contents
*1 When the Internet fax expansion kit is installed.
*2 When the facsimile expansion kit is installed.
*3 When network connection is enabled.
X I-Fax Send Settings 7-80
 I-Fax Reception Report On/Off Setting Disabled 7-80
 I-Fax Reception Report Request Timeout Setting 1 hour 7-80
 Number of Resend Times at Reception Error 2 7-80
 Maximum Size of E-mail Attachments Unlimited 7-80
 Rotation Sending Setting All Enabled 7-81
 Printing Page Number at Receiver Enabled 7-81
 Recall in Case of Line Busy Times: 2, Interval 3 min. 7-81
 Recall in Case of Communication Error Times: 2, Interval 3 min. 7-81
X I-Fax Receive Settings 7-81
 Auto Receive Reduce Setting Enabled 7-81
 Duplex Reception Setting Disabled 7-81
 Set Address for Data Forwarding –
7-81
• Direct SMTP Disabled
• Add Hostname or IP Address Too Disabled
• Hostname or IP Address –
 Receiving Date & Time Print Disabled 7-82
 A3 RX Reduce Disabled 7-82
 POP3 Communication Timeout Setting 60 sec. 7-82
 Reception Check Interval Setting 5 min. 7-82
 I-Fax Output Setting Varies depending on the machine
configuration
7-82
X Allow/Reject Mail or Domain Name Setting All Invalid 7-82
Item Factory default setting Page

Sharp MX-2600N Specifications

Power

power requirements	230 ~240V AC, 50/60 Hz
power consumption	1.84 kW
warm-up time	Less than 60 sec.

System Memory

copier memory	Standard 1, 024MB, max. 2, 048MB
printer memory	Standard 512MB, max. 1, 536MB
HDD	80GB

Paper Handling

standard paper capacity	1, 100 sheets
maximum paper capacity	5, 600 sheets
paper weight (tray)	60 g/m² to 209 g/m²

Weight and Dimensions

dimensions	620 x 695 x 950 mm
weight	Approx. 112 kg