EasyManuals Logo

Sharp MX-2600N User Manual

Sharp MX-2600N
799 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #240 background imageLoading...
Page #240 background image
2-126
COPIER
Contents
7
Change the settings.
(1) Touch the key of the setting that you want
to change.
The setting screen of the touched key opens. Change the
settings and touch the [OK] key.
(2) Touch the [OK] key.
To change the number of sets printed, set the desired number of copies (sets) with the numeric keys. After changing
the number of sets, touch the [End] key in the touch panel (not the [START] key) to print the sets.
Special modes that can be adjusted are Margin Shift, Pamphlet Copy, Tandem Copy, Covers/Inserts, Transparency
Inserts, Multi-Shot, and Stamp.
For Pamphlet Copy, Covers/Inserts, and Multi Shot, only changes to the settings of the functions can be made; the
functions cannot be newly added or deleted.
When transparency film is used, the settings can be changed, new settings can be added, and the function can be
canceled. However, this is not possible when pamphlet copying is enabled.
8
Press the [COLOR START] key or the [BLACK & WHITE START] key.
One set of copies is printed again using the adjusted settings. Check the results. If further adjustments are needed, repeat
steps 6 through 8. (Repeating Proof Copy does not decrease the remaining number of sets to be printed.)
9
Touch the [End] key.
You will return to the base screen of copy mode and the
remaining sets will be printed.
To cancel scanning and copying...
Press the [STOP] key ( ).
If Proof Copy is executed while the machine is printing another job, the other job is interrupted and the proof copies are
printed. The previous job will resume after the proof copies are printed.
However, if proof copy is executed during output of a job for which both two-sided printing and stapling are enabled, the proof
copy will be output after the job in progress is finished.
If the [End] key is touched to execute printing of the remaining sets while the machine is printing another job, the remaining
sets will be printed after all previously reserved jobs are completed.
Paper Select 2-Sided CopyColor Mode
Special ModesOutput
OK
Proof Copy
(2)(1)
EndChange
Press [End] to continue.
To make a proof copy again, press
[Start].

Table of Contents

Other manuals for Sharp MX-2600N

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp MX-2600N and is the answer not in the manual?

Sharp MX-2600N Specifications

Power IconPower
power requirements230 ~240V AC, 50/60 Hz
power consumption1.84 kW
warm-up timeLess than 60 sec.
System Memory IconSystem Memory
copier memoryStandard 1, 024MB, max. 2, 048MB
printer memoryStandard 512MB, max. 1, 536MB
HDD80GB
Paper Handling IconPaper Handling
standard paper capacity1, 100 sheets
maximum paper capacity5, 600 sheets
paper weight (tray)60 g/m² to 209 g/m²
Weight and Dimensions IconWeight and Dimensions
dimensions620 x 695 x 950 mm
weightApprox. 112 kg

Related product manuals